Tips To Install A New MP3 USB Car Radio In Mazda 6

How to Remove the Radio From a Mazda 6? Mazda six is one of the most popular cars available in the market all over the world. Mazda six comes with a default factory audio system. This system is of very high quality and performance. There is no need to change the audio system in this car. But still people do change it to upgrade their audio system to have powerful stereo and speakers. In particular youngsters are mad about powerful audio system and speakers. So, in order to upgrade your default audio system in Mazda six car you have to first remove the default stereo present in it. If you go to a mechanic or an engineer they may demand you big amount of money. You can save money and your time by doing this work on your own.

For completing this task you will require a socket wrench, pliers and a screw driver.

The things you will be in need are pliers, screw driver and socket wrench. Make sure you have screw drivers of different sizes. If you do not have screw drivers of different size then you may be stuck in the middle. Make sure all these things are ready before starting your work to avoid unnecessary wastage of time.

For removing the gear shift knob rotate it in the counter clockwise direction. After a few rotations you will find the knob loosening; after loosening it remove the gear shift knob. Now remove the console from the car. You will find that the console extends to the ashtray. After removing the console you will find a couple of screws located in the underside of the climate control panel. Remove both the screws by rotating them in counter clockwise direction, with the help of a screw driver.

Once the console is removed completely you can see two screws. These screws are removed using appropriate screw drivers. These two screws can be found at the bottom side of the weather controlling panel.

You will find that the radio and the climate control are mounted on the same assembly. Loosen the entire assembly so that the whole setup can be removed. The air vent covers are included in the panel. Remove this cover. Turn the cover upside down. There will be twelve screws located on the cover. These screws are responsible for mounting the climate and the radio controls. Remove all the 12 screws with the help of a screw driver. Once all the screws are removed, the radio can be removed from the car.

After removing the old radio, you can now install the new radio. The steps involved in the installation of the radio are exactly the reverse of the steps mentioned above. Replace the screws and the covers. Now put the gear back to its original position and connect the negative cable back to the negative terminal of the car\’s battery.

Now the default factory radio is completely removed from your Mazda six car. You can fit your new audio system and test it. Once the new set is fixed your new audio system is ready to rock your Mazda six. Thus this article shows How to Remove the Radio From a Mazda 6 without much difficulty.

Want to find out more about Radioblende, then visit Author Name\’s site on how to choose the best radio installation kits for your needs. Get a totally unique version of this article from our article submission service