How To Change A Volvo OEM Radio
February 26, 2010 by Chris Green
Filed under Vehicle
Do you all want to know how installation of stereo in a car has to be done especially in luxury and high end cars? Then this the perfect article that we should read. Let us learn How to Install a Radio in a Volvo. Many may think this job is complicated and assign a professional to do this. But it is very simple. We can save few bucks by trying to do this installation on our own.
The following steps that must be followed are not very hard and little preliminary as well. The things that are needed are a new stereo that is to be installed and a screwdriver of suitable size.
A simple screw driver is enough to do this installation. Of course we need a new stereo which we are going to install. Let us look at the step by step procedure.
How is the compatibility check made? It is simple. A harness for wiring and a mount provision for stereo should be present in any system that is compatible. The wires connected to negative terminal of car battery is disconnected. These wires are usually painted black in color. Center console has screws attached to it. These screws are removed by the use of screw driver and the console after being taken out is kept separately.
After removing the console, remove the old stereo system from the car. Then disconnect the antenna wire and the wiring harness from the stereo. These wires will be located at the rear end of the stereo. The next step is securing the stereo mount in the dash with the help of clips. The usage of clips can be avoided if the stereo mount fits snugly in the dash.
This new stereo is then connected to wiring harness via its adapter. The next thing that must be connected is the wire connecting the antenna. These both connections are made behind this new stereo. Then place this stereo back in its position in the dash.
The last step we should supply power. This can be done by again connecting wire to the battery. The wire is to connected to the negative terminal. This wire will be present usually in black color. The job is done. However it is better to make a final check to see if we have finished installation of new stereo perfectly in our volvo. Just switch on radio. If it plays properly we should pat ourself because we have now become half professional. If it does not work let us not worry . Check if all connections and disconnections are done correctly. The only place where it is little risky top work with is the live wires. So ensure that the battery is switched off.
Follow these simple steps to remove the old radio and install a new radio in your Volvo.
Want to find out more about Radioblende, then visit Author Name\’s site on how to choose the best radio installation kits for your needs. Don\’t reprint this exact article. Instead, reprint a free unique content version of this same article.
